Pristine Cleaning Gurus Logo

How to Clean a Bathtub the Right Way

4 min readPristine Cleaning Gurus Team
Clean white bathtub and tile after a bathroom clean by Pristine Cleaning Gurus

The Short Answer

Wet the tub, spread a non-abrasive bathroom cleaner over the surface, give it a few minutes, scrub with a soft sponge, and rinse well. Then wipe the fixtures and dry the edges.

The right cleaner depends on what the tub is made of. Porcelain over steel or cast iron is hard and takes more scrubbing. Acrylic and fiberglass are softer and scratch easily, so skip the gritty powders on those.

Rather have us handle it?

We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.

Step by Step

  1. Clear the ledge. Take out bottles, razors and the bath mat so you can reach every inch.
  2. Rinse the walls and floor of the tub with warm water so loose hair and soap come off first.
  3. Apply cleaner to the tub floor, the sides and the ledge. Follow the time on the label.
  4. Scrub with a soft sponge or brush. Work from the top of the walls down to the floor so the drips land on the part you have not done yet.
  5. Do the details. Use an old toothbrush around the drain, the overflow plate, the faucet base and the corners where the tub meets the wall.
  6. Rinse thoroughly and wipe the faucet and handles with a clean cloth so no film is left behind.
  7. Dry the edges with a towel. Water that sits on the caulk is where dark spots start, especially in Florida humidity.

If the tub wall has a gray, filmy layer that wipes off with a fingernail, that is soap scum. We cover it in our guide to soap scum on tubs and tile.

What Not to Use

  • Scouring powder or steel wool on acrylic or fiberglass. They leave scratches that hold dirt and make the tub harder to clean next time.
  • Bleach mixed with anything else. Never mix bleach with ammonia or with vinegar or other acids. Use one product at a time and rinse the tub between products.
  • Harsh cleaners on a textured or slip-resistant bottom without testing a hidden spot first.

When in doubt, go with the tub maker's care instructions.

Keeping It Clean Longer

  • Rinse the tub walls after each bath or shower.
  • Run the bath fan during and after, and leave the door open to dry the room.
  • Keep bottles off the ledge so soap rings do not form under them.
  • Wipe the faucet and drain cover once a week.

When to Hand It Off

Every standard clean at Pristine includes the toilet, tub and shower scrubbed. See residential cleaning for weekly, biweekly or monthly visits.

If the tub, grout and caulk need real attention, a deep clean covers grout in the bathroom, shower door tracks and caulk lines. Call (904) 469-1035 Monday to Friday, 9 AM to 5 PM.

Frequently Asked Questions

Can I use the same cleaner on every kind of tub?
Not always. Porcelain handles more than acrylic or fiberglass, which scratch and dull more easily. Check your tub's care label and use a non-abrasive cleaner when you are unsure.
How do I clean the tub without hurting my knees?
Use a long-handled brush or a sponge on a stick, and kneel on a folded towel. Work in sections instead of all at once.
How often should a tub be cleaned?
Weekly keeps buildup light. If it has been months, plan on more than one pass.

Dreading the Tub Scrub?

Toilet, tub and shower are scrubbed on every standard clean. Request a free estimate.