Pristine Cleaning Gurus Logo

How to Clean Window Tracks and Sills

4 min readPristine Cleaning Gurus Team

The Short Answer

Vacuum the loose grit first, loosen what is stuck with a little warm soapy water and a small brush, then wipe the track clean and dry. Do the sill last.

Window tracks catch whatever floats in. In Northeast Florida that means pollen in spring, sand from shoes and wind, and plenty of dust. When the track gets damp from condensation, it all turns into a gray sludge that is hard to see until you look.

Rather have us handle it?

We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.

Step by Step

  1. Open the window all the way and, for a sliding window, slide it to each end in turn so every part of the track is exposed.
  2. Vacuum the track with a crevice tool. Get the corners and the little weep holes, which let water drain out.
  3. Loosen the grime. Dip a stiff small brush in warm water with a drop of dish soap and scrub along the groove.
  4. Lift out the sludge. Wrap a cloth around a butter knife or a thin flat tool and run it down the track. Change the cloth face as it gets dirty.
  5. Use cotton swabs for the tight corners and the weep holes.
  6. Wipe with a clean damp cloth, then dry the track. Standing water in a track leads to the dark spots that come back quickly.
  7. Do the sill. Wipe the ledge, the frame and the corners with the same soapy cloth, then dry.

Mistakes to Avoid

  • Using a sharp metal tool bare. It can scratch aluminum or vinyl frames. Always wrap it in cloth.
  • Blocking the weep holes. If they clog, water has nowhere to go. Keep them clear.
  • Mixing cleaners. Never mix bleach with ammonia, vinegar or other acids, and give a window frame a quick test spot before using anything stronger than soap.
  • Spraying the whole thing wet. Wet grime spreads. Vacuum first.

If you notice black spots that keep coming back on a damp sill, it may be a moisture problem. Our guide to a musty smell and humidity explains what the EPA says about keeping humidity in check.

How Often

A quick vacuum of the tracks when you do the floors keeps them from packing up. A full scrub twice a year is plenty for most homes. Do one in spring after pollen season, and one before the holidays.

When to Hand It Off

Our deep cleaning includes window sills and tracks, blinds slat by slat, baseboards hand-scrubbed in every room, and door frames, knobs and hinges. It also covers inside closets and under and behind furniture.

Call (904) 469-1035 Monday to Friday, 9 AM to 5 PM, or ask for a free estimate.

Frequently Asked Questions

What is the best tool for window tracks?
A vacuum with a crevice tool, a stiff small brush like an old toothbrush, and a flat tool wrapped in a cloth. Cotton swabs handle the corners.
Why are my window tracks so dirty?
Dust, pollen, sand and a little moisture collect in the groove and turn into a paste. Tracks sit low and out of sight, so they are easy to forget.
Do I need to take the window out?
Usually not. Slide the window to each end and clean the part that is exposed, then slide it back and do the rest.

Window Tracks Full of Gunk?

Every deep clean includes window sills and tracks. Request a free estimate.