Pristine Cleaning Gurus Logo

How to Clean a Shower Head

4 min readPristine Cleaning Gurus Team

The Short Answer

Soak the head, scrub the nozzles, rinse, and run hot water for a minute. That clears most of the crust that makes the spray go sideways. The soak does the hard work, so you do not have to scrub hard.

The white crust around the holes is mineral buildup. We have a separate guide on limescale, so this page sticks to the shower head itself.

Rather have us handle it?

We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.

Step by Step

  1. Check the finish. Look up the maker or read the care sheet. If it says no acids, skip the vinegar and use warm water with dish soap and a brush.
  2. Fill a plastic bag. Pour in enough white vinegar to cover the face of the head. Use plain vinegar only, with nothing else added.
  3. Tie the bag on. Use a rubber band or twist tie so the face sits in the liquid. Leave it for the time the maker suggests, or an hour or so if they do not say.
  4. Remove the bag and scrub. An old toothbrush loosens what the soak softened. Rub each nozzle with your finger if it has rubber tips.
  5. Rinse and run the water. Turn the shower on hot for a minute so loose bits wash out.
  6. Wipe it dry. A dry cloth keeps water spots from coming right back.

What Not to Do

  • Never mix vinegar with bleach. The two together give off fumes you should not breathe. Never add ammonia to either.
  • Do not soak a brass, bronze or coated head for long. The finish can fade or peel. Test a small spot first.
  • Do not poke the holes with a pin or wire. You can scratch the opening and make the spray worse.
  • Do not force a stuck head with a wrench. Wrap a cloth around it so you do not mark the finish, and stop if it will not move.

How Often to Clean It

Look at it when you clean the shower. If the spray splits or you see white crust, give it a soak. A quick wipe with a damp cloth whenever you do the walls helps prevent the buildup.

If water pressure stays weak after a clean, the problem may be inside the pipe. Call a plumber for that one.

When to Hand It Off

The shower head is one small piece of the bathroom. Our deep cleaning includes the toilet, tub and shower scrubbed, the shower door tracks and caulk lines, and grout in the bathroom. Regular residential visits keep the tub and shower scrubbed between deep cleans.

Call (904) 469-1035 or request a free estimate.

Frequently Asked Questions

Can I use vinegar on any shower head?
Not always. Vinegar is fine on many chrome heads, but it can dull brass, oil-rubbed bronze, nickel and coated finishes. Check the maker's care guide first.
Do I need to take the shower head off?
No. A bag tied over the head works for most. Taking it off lets you scrub the threads and the screen, but only if it comes off by hand or with a gentle turn.
Why is my shower pressure weak?
Clogged nozzles are a common reason. If cleaning the nozzles does not help, the cause may be in the plumbing, and that is a plumber's job.

Shower Head Spraying Sideways?

A deep clean covers the toilet, tub and shower, shower door tracks and caulk lines. Request a free estimate.