The Short Answer
Take the filter out, soak it in hot water and dish soap, scrub it with a soft brush, and rinse. While it soaks, wipe the hood itself with a degreasing cleaner or soapy water. Dry everything before you put it back.
The hood catches grease from the air. Left alone, it turns tacky and picks up dust. That is why the underside feels sticky.
Rather have us handle it?
We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.
Step by Step
- Turn off the fan and the burners. Let everything cool.
- Remove the filter. Most slide or pop out with a small tab.
- Soak it. Fill the sink with the hottest water that is safe for your hands and add a good squirt of dish soap. Leave it 10 to 15 minutes.
- Scrub gently. Use a soft brush on both sides of the mesh. Rinse with hot water.
- Wipe the hood. Start inside, then do the underside, the sides and the front. Change the water when it gets cloudy.
- Dry and replace. Dry the filter fully so it does not drip.
Mistakes to Avoid
- Do not spray cleaner into the fan motor or the light socket.
- Do not mix degreaser with bleach or ammonia.
- On stainless steel, wipe with the grain. Scrubbing across it leaves marks.
- Use a degreaser only as the label says, and open a window.
Ready to get started?
How to Keep It Clean
Turn the fan on before you start cooking and leave it on a few minutes after. Wipe the front of the hood when you wipe the stove. A little grease wiped weekly is much easier than a thick layer once a year.
When to Hand It Off
Our deep cleaning goes inside the oven, broiler drawer and range hood, along with inside the microwave and refrigerator. Our move-out clean includes the range hood too. Call (904) 469-1035 for a free estimate.
