Pristine Cleaning Gurus Logo

How to Clean Drywall Dust After a Remodel

5 min readPristine Cleaning Gurus Team
Living room with a fireplace after a post-construction clean

The Short Answer

Work from the top of the room to the bottom, and vacuum before you wipe. Wiping dry drywall dust just smears it into a film, and a broom puts it back in the air. A vacuum with a fine filter, then a damp cloth, is the way to get it out.

Expect to go over some surfaces twice. Drywall dust is fine enough that the first pass never gets all of it.

Rather have us handle it?

We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.

Before You Start

  • Open a window or run a fan, and wear a dust mask.
  • Close off the work area from the rest of the house if you can.
  • Cover or move anything you do not want coated again.
  • Let the dust settle for a while before you start, so you are not stirring it up.

Step by Step, Top to Bottom

  1. Ceilings and corners. Use a vacuum brush tool on the ceiling edges, corners and any light fixtures.
  2. Walls. Vacuum gently, then wipe with a barely damp microfiber cloth. Rinse the cloth often.
  3. Vents and fans. Dust collects here and can blow back out. Vacuum and wipe the covers and fan blades.
  4. Windows, sills and tracks. Vacuum the tracks, then wipe sills and glass.
  5. Shelves, counters and trim. Vacuum, then wipe. Do the baseboards last on the walls.
  6. Floors last. Vacuum slowly, and mop once the dust is gone. Change the water as it gets gray.

Mistakes to Avoid

  • Using a regular household vacuum with a weak filter. It can blow fine dust back out.
  • Wiping with a soaking wet cloth, which makes a paste that is hard to remove.
  • Cleaning the floor first. The dust from above will land on it again.
  • Forgetting the places you cannot see, like tops of door frames and cabinets.
  • Mixing bleach with other cleaners. Plain water and a clean cloth work for this job.

When to Hand It Off

If the dust has gotten into every room, you will spend a long weekend on it. Our post-construction cleaning handles drywall dust, paint overspray on glass, adhesive residue, grout haze and caulk smears after builds and remodels, for homes and commercial spaces. For what to expect, read our post-construction cleaning guide.

Frequently Asked Questions

Why does drywall dust keep coming back?
It is very fine and it hangs in the air. It settles on every flat surface, gets into vents and then drifts back out. Cleaning from the top down and vacuuming with a good filter helps keep it from re-settling.
Can I just sweep it?
Sweeping throws most of it back into the air. Vacuum first, then wipe with a damp cloth.
Does Pristine clean drywall dust?
Yes. Drywall dust is one of the things our post-construction cleaning covers, on remodels and builds, residential and commercial.

Drywall Dust Still Everywhere?

Our post-construction cleaning handles drywall dust after builds and remodels, residential and commercial. Request a free estimate.