Pristine Cleaning Gurus Logo

How to Get Rid of Shower Mildew and Keep It Away

5 min readPristine Cleaning Gurus Team

The Short Answer

For the dark spots on shower caulk, grout and the corners of the tub, scrub with detergent and water, rinse, and dry the area completely. The U.S. Environmental Protection Agency (epa.gov/mold) says that is how to deal with mold on hard surfaces, and that moisture control is what keeps it away.

A closed-up bathroom stays damp for hours after a shower, so a routine matters more than a one-time scrub.

Rather have us handle it?

We clean homes and businesses in Jacksonville, Jacksonville Beach, Ponte Vedra, Fernandina Beach, Yulee and St. Augustine.

How to Clean It, Step by Step

  1. Open the door and run the fan. You want air moving before you start.
  2. Wet the area with warm, soapy water. A squirt of dish soap or a household detergent in a spray bottle is enough.
  3. Scrub with a stiff brush. An old toothbrush gets the caulk line, the corners and the grout. Use a non-scratch sponge on the tub and tile faces.
  4. Rinse well. Leftover soap feeds the next round.
  5. Dry completely. Wipe the walls and the caulk with a towel. Leave the fan on and the curtain pulled open or the door open.
  6. Wash the curtain and liner. Many can go in the washing machine on the care label's setting. Hang them to dry fully.

If the black is in the caulk itself and will not scrub out, the caulk may be worn out and need replacing. That is a repair, not a cleaning job.

What Not to Do

  • Never mix cleaners. Do not mix bleach with ammonia, and do not mix bleach with vinegar or any acid. The gas that results can hurt you.
  • Do not paint over it. Paint or caulk laid over damp growth traps moisture and hides the problem.
  • Do not scrub dry growth in a closed room. Wet it first and keep air moving.
  • Do not use acid on natural stone. Marble and travertine tile can etch, so stick to detergent and water there.

How to Keep It Away

  • The EPA says to keep indoor humidity below 60 percent, ideally between 30 and 50 percent. A small humidity meter costs little and tells you the truth.
  • Run the bathroom fan during the shower and for a while after.
  • Squeegee or towel the walls and the door track after the last shower of the day.
  • Hang towels so they dry. A damp pile on the floor keeps the room humid.

If the whole house smells damp, read our musty smell and humidity guide.

When to Hand It Off, and to Whom

Small spots on grout and caulk are a cleaning job. For larger mold areas, the EPA says to get a professional. If it covers a big patch, keeps coming back, or you see it on walls, ceilings or behind fixtures, call a mold professional. Our work is cleaning, not mold remediation.

For the surfaces we do clean, our deep cleaning includes shower door tracks and caulk lines, grout in the bathroom, and the exhaust fan cover. Call (904) 469-1035 or request a free estimate.

Frequently Asked Questions

Why does mildew keep coming back in my shower?
Because the moisture stays. Soap film, a closed door and a weak fan keep the walls damp, and mildew grows where it stays wet. Cleaning without drying is a short fix.
Do I need bleach to clean shower mildew?
Not on a small spot. The EPA says to scrub mold off hard surfaces with detergent and water and dry them completely. If you do use bleach, never mix it with ammonia or vinegar.
When is it more than mildew?
If it covers a large area, keeps coming back after you clean and dry, or you find it inside the wall, call a mold professional. That is outside normal cleaning.

Mildew Back in the Shower Again?

Our deep clean includes shower door tracks and caulk lines and bathroom grout. Request a free estimate.